Mechanical Engineering Technology : Students

What We're About

Welcome to the Industrial and Engineering Technology Department and to the Mechanical Engineering Technology Program! This guide was prepared as a supplement to information found in the Undergraduate/Graduate Catalog and the class schedule and is intended to assist students in planning and completing a Bachelor of Science Degree in Mechanical Engineering Technology (MET).

The information contained in this guide is not a substitute for the Catalog or Class Schedule. It should be noted that it is the student's responsibility to become familiar with important dates, deadlines, regulations and rules contained in the Catalog and Class Schedule. Upon acceptance to Central you should have received a coupon that is valid for one free Catalog if redeemed at the University Store. If you are already a student at CWU, and need a current Catalog, they may be purchased in person at the Store for $2.25 or through the mail for $5.85. If you have any questions, feel free to call the University Store at (509) 963-1311. A Schedule of Classes is available in Mitchell Hall at no charge, or can be ordered through Academic Services by calling (509) 963-3001.

The four-year Bachelor of Science Degree in Mechanical Enginnering Technology is one of several degrees offered through the Industrial and Engineering Technology (IET) Department, which is in turn part of the College of Professional Studies. The program is housed in the Hogue Technology Building, and most of the MET courses meet in Hogue.

The MET program offers two options; mechanical technology and manufacturing technology for the student. The program offers a broad foundation in the practical application of mechanical and manufacturing engineering principles. Graduates concentrating in mechanical technology may pursue one of the following career paths: machine and product design, product and system (test) evaluation, plant operation and management, technical sales, field service, environmental quality control and energy production. Graduates concentrating in manufacturing technology are prepared to enter career paths as tool designers, tool and production planners, numerical control programmers, computer assisted machine planners, manufacturing process analysts, quality assurance and technical field representatives.

The program has averaged between 50 and 60 students, with approximately 12 graduating each year. Smaller class size allows individual attention and a broad range of exposure to all aspects of construction.

Student Organizations

Students are strongly encouraged to become involved with at least one professional organization. At present, a student chapter of the American Society of Mechanical Engineers (ASME) is very active in the IET Department. Usually, over 60 to 70 percent of the MET students join the ASME. Student loans, scholarships and the ability to place the students resume on an ASME national/international job search bulletin board make this organization a very useful one to seek membership in. In addition the student ASME chapter provides professional development by providing field trips to industrial companies, inviting industry speakers to address student meetings and classes, and trips to ASME student regional conferences and leadership seminars. The cost of joining the ASME is currently $20.00 per year. For this fee, the student receives 12 copies of the ASME magazine as well and has many other benefits. An interested student may learn more about ASME membership from Professor Roger Beardsley, the organization's faculty advisor.

Other student organizations such as the Society of Manufacturing Engineers (SME) and the American Foundry Association (AFS) are could possibly be started and organized if student interest is found to exist. This department has previously had an active chapter of the Society of Manufacturing Engineers. The SME is a national organization having many of the benefits for the student as has the ASME but the focus is on manufacturing.

Although not specifically required by the major, students are strongly encouraged to gain technical experience over the summer months. Not only will this complement their classroom education but it will also help to bolster their resume when seeking permanent employment upon graduation. Employment opportunities, both for summer and permanent positions, will be announced in class and will be posted on the MET bulletin board located in room 211 in the Hogue Building. Students are also encouraged to establish a placement file with Career Cooperative Development Services, located in Barge Hall.

Advising & Assistance

Who will be your advisor?

Students interested in the MET program should cal our main office at:

• (509) 963-1756

When, where and how will you arrange to meet with your advisor?

The same faculty advisor will advise each student as long as that student remains interested in the MET program. As soon as the Class Schedule becomes available each quarter, usually about two weeks prior to preregistration, advisors will post a list of sign up times for advising on their office door. Students are responsible for meeting with their advisor each quarter to develop an academic plan that will meet the requirements of the University and of this major. It is the responsibility of the student, rather than the advisor, to continuously audit his/her program for successful completion of the requirements. It should be noted that students must obtain permission numbers from their faculty advisor in order to register for some of the MET courses.

Academic Performance

Academic performance for Mechanical Engineering Technology majors is governed by the standards set forth in the University Catalog. You should become familiar with University policies pertaining to study load, withdrawal from a course, grade point average, repetition of courses, incomplete grades and scholastic standards. It should be noted that all required courses in the MET major must be taken for a letter grade. If you have questions see your faculty advisor.

Ethics & Conduct

Ethical conduct is an integral part of the Engineering Technology education and students in the Mechanical Engineering Technology major are expected to take full personal responsibility to comply with those aspects of the profession that are applicable to students. Students are clearly expected to do their own work and not copy the work of others. The dignity of the classroom setting is important to learning. Students are expected to be seated prior to the beginning of class and to refrain from disruptive behavior during the class period. Smoking is not permitted in the Hogue Technology Building at any time.

Scholarships

Several scholarships are available each year for students majoring in Mechanical Engineering Technology. Please check with your advisor concerning the availability of scholarships and loans.

Design Your Program

This website is meant to serve you as a tool in planning your career and future. You should be able to locate most of the information needed to let you evaluate your plans for a learning experience with us at CWU. If you have particular questions, such as transfer credit and course content, please drop us a line!