NO WIRELESS KEYBOARD OR MOUSE ACTIVITY

This problem is likely to be a lost connection. The connection between the mouse and the USB receiver or the keyboard and the USB receiver can be lost due to several reasons such as:

Eliminate any problem sources mentioned above that might be affecting your devices.

 

Before connecting your EX 110:

  1. Make sure you have fresh batteries in both your mouse and keyboard.
  2. Make sure you have properly connected the EX 110 receiver to your computer.

Note: When connecting to a computer with a USB port, the Green cable is unused and should not be connected. See also Knowledge Base article 9523.

  1. Turn your computer on

 

 

 

 

 

 

Follow the procedures below to reconnect your mouse and keyboard.

 

Connecting the Mouse

Description: rcvr connect button     Description: mse connect button

  1. Press and release the black connect button on the top of the receiver. The green LEDs on the receiver will blink one after the other. This will broadcast a signal to your mouse. This broadcast will last only a few seconds, so you must perform the next step quickly.
  2. Quickly press the red connect button on the bottom of the mouse for 1 second, then release it. The mouse is now connected to the receiver.
  3. Verify the mouse is functioning correctly. If it is not working repeat the above steps.

Connecting the Keyboard

Description: rcvr connect button      Description: kbd connect button

  1. Press and release the black connect button on the top of the receiver. The green LEDs on the receiver will blink one after the other. This will broadcast a signal to your keyboard. This broadcast will last only a few seconds, so you must perform the next step quickly.
  2. Quickly press the red connect button on the bottom of the keyboard for 1 second, then release it. The keyboard is now connected to the receiver.
  3. Verify the keyboard is functioning correctly. If it is not working repeat the above steps.