Salmon
Fishing
Jigging




FIRST STEP: Tie a ¾ oz jig on your line, and stand on
something like your balcony or porch. Release the line from
your reel and let the jig fall to the ground or the floor.
(Notice how the line is curly when the jig is resting on the
ground.) This curly line is what will tell you the jig has hit the
bottom of the lake, pond, or river, when you are sitting in a
boat or on the dock and you cannot see your jig.
Now reel up the slack line until it is taunt.
To do the Jigging Action, lift the jig up by raising your arm
up about six inches and then drop it again by making the
opposite action down to ground. If you cannot actually feel
the jig touch the ground, then watch for the slack line.
Keep doing this until you feel the jig touching the bottom
without having to look for the curly line. If it never gets to
that point, then you should try changing to a heavier jig, but
most people can feel ¾ oz immediately. If you are having a
hard time sensing the jig, your rod and/or line may be the
culprit.
The better your rod is, the more message it will telegraph
back to your hand. If your line is too old or
heavy, it will also impede your sense of feel.
SECOND STEP: Now that you
flutter
Back
to Top of Page
Back
to Lesson Nine
Back
to Block Plan
Back
to Developmental Analysis
Back
to Salmon Fishing Home Page